Iai-america XSEL-KET Uživatelský manuál stáhnout pdf (Strana 393)

374

INTELLIGENT ACTUATOR

10. Servo Gain Adjustment

Since the servo has been adjusted at the factory according to the standard actuator specification, normally the

servo settings need not be changed.

However, vibration or abnormal noise may generate depending on how the actuator is affixed, load conditions,

and so on. Accordingly, servo adjustment parameters are disclosed so that a quick action can be taken when

necessary.

In particular, vibration or abnormal noise may generate on custom specifications (whose ball screw lead or

stroke is longer than the standard specification) due to the effects of external conditions.

In this case, the following parameters must be changed. Contact IAI.

 Position gain

Axis-specific parameter number Unit Input range Default value (reference)

60 /sec 0 to 9999 30

This parameter determines the response of the position control loop.

Increasing the set value improves the conformance to the position command.

However, an excessively high setting may cause the actuator to overshoot easily.

If the set value is low, conformance to the position command drops and the positioning takes a longer time.

 Speed loop gain (Parameter list 1)

Driver card parameter number Unit Input range Default value (reference)

38 -

0  32767

500

This parameter determines the response of the speed control loop.

Increasing the set value improves the conformance to the speed command (increases the servo rigidity).

The set value should be higher when the load inertia is larger.

However, an excessively high setting may trigger overshooting or oscillation and cause the mechanical parts to

vibrate easily.

Speed

Set value is high (overshoot).

Set value is low.

Time

Speed

Set value is high (overshoot).

Set value is low.

Time

1 2 ... 388 389 390 391 392 393 394 395 396 397 398 ... 435 436

Žádné komentáře

Iai-america XSEL-KET Uživatelský manuál Strana 393